Detect water leaks in the home is very useful to avoid damage and reduce water consumption. However, sometimes, it is not easy to detect where the leaks are, since the damage is not always close to where they occur. For this reason, different devices have been developed that will help you find them, to be able to act quickly and avoid major problems.
A water leak is an unwanted water loss normally through a hole, or pore, that occurs in a pipe. Depending on the size and location of it, its location can be more or less expensive.
Traditionally, water leaks have been found through visual analysis. That is to say, where humidity or leak was observed, the origin of the leak was sought, using the experience of the operator. This, often, meant having to chop the wall, floor or ceiling until finding the leak.
In recent years, there have been important advances in the detection of leaks. One of the newest detectors is the acoustic one. These equipment are based on amplifying the sounds generated by a leak so that the operator can hear them and locate where they are being produced.
How does a water leak detector work
Integration with home automation
The damage that a leak can cause in our home can be significant; therefore, in some homes, it is opting to install detectors capable of locating the presence of water and send a warning to the phone or another device.
These equipment are usually installed in bathrooms, kitchens or laundries so that, if a leak occurs due to a broken pipe or overflow, the detector will notify as soon as possible. Some are even able to close the supply minimizing the damage.
In short, leak detectors are an element that can help us avoid major problems, both by finding the leak and communicating it as soon as it occurs.
The flood detector uses the same principles as a smoke detector or a gas leak sensor. The two types of flood sensor – wireless detector and autonomous sensor – actually work thanks to the interaction between an external probe, which detects the presence of a puddle, and a power plant from which emerges the warning signal. The fluid sensor, placed generally at ground level, consists of two electrodes installed at a predefined level.
In the case of a wireless detector, these two elements transmit electrical signals to a central unit, via a radio transmitter in the event of contact with water, automatically triggering the alert. Some devices even manage to signal residents by SMS or automatically close the water inlets to stop household leaks.
Installation of a flood detector
To ensure its reliability, a flood detector must be placed ideally on the ground. The fluid sensors will be able to apprehend the smallest water rise in each room to be monitored. The sensor will operate faster if installed near water sources in rooms at high risk of leakage: kitchen, cellars, laundry room, bathroom, etc.
Under sink leaks, how to fix them?
In plumbing, sink leaks are problematic and require professional intervention. If you do not know how to fix a leak, an expert could help you with this type of troubleshooting. He will make sure to put everything into practice to stem once and for all. If necessary, a plumber troubleshooter must intervene on site to repair your sink properly. Leaks often happen unexpectedly and even late at night, in front of that, the first thing to do is to call your specialist dépanneur in search of leakage by infrared thermography Courbevoie.
In the meantime, try to cut off any water supply. When you leak, the water tends to spread through the pipes, causing immense damage and a waste of water and money. That’s why it’s important not to stress and to contact your convenience store very quickly. For the repair of leaks under the sink, the plumber must inspect and diagnose faucet that has necessarily lost its seal. At the same time, he must also check the condition of the pipes, if they are damaged for example. Finally, if the plumber detects a defective part, he must replace it with a brand new part.
What to do in case of a shower leak?
Having a shower that leaks is very unpleasant especially on weekends, a good time to rest while taking a hot bath. It is therefore imperative to solve the problem immediately. To do this, a plumber can troubleshoot your home to fix the leak in your shower.
In general, a water leak or other breakdown in your plumbing fixture is the job of a specialist troubleshooting water leak behind Malakoff tile. The latter will provide you with a personalized troubleshooting quote.
Leave a Reply